98
queues, the switch allows TC3 to occupy the whole bandwidth following the SP
mode and the TC0, TC1 and TC2 in the WRR group will take up the bandwidth
according to their ratio 1:2:4.
equ —— Equal-Mode. In this mode, all the queues occupy the bandwidth
equally. The weight value ratio of all the queues is 1:1:1:1.
Command Mode
Global Configuration Mode
Example
Specify the Schedule Mode as Weight Round Robin Mode:
TL-SG2424(config)# qos queue mode wrr
show qos interface
Description
The show qos interface command is used to display the configuration of QoS
based on port priority.
Syntax
show qos interface [ gigabitEthernet port | range gigabitEthernet port-list ]
Parameter
port —— The Ethernet port number.
port-list —— The list of Ethernet ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration of QoS for port 5:
TL-SG2424# show qos interface gigabitEthernet 1/0/5
Display the configuration of QoS for ports 1-4:
TL-SG2424# show qos interface range gigabitEthernet 1/0/1-4
show qos cos-map
Description
The show qos cos-map command is used to display the configuration of IEEE
802.1P Priority and the mapping relation between cos-id and tc-id.
