A SERVICE OF

logo

TOSLINE-S20 Active Star Coupler (ASC25) Instruction Manual 6F3B0360
TOSLINE S20 33
(3) Fold the tension member, and insert the collar through the jacket of optical fiber core wire
until the collar went under the cord housing. The collar shall be exposed from the edge of
housing removal by 1 mm or less.
Housing
Collar
Jacket
Tension member
is divided to two
equal portions.
Housing
Collar
Jacket
max. 1 mm
Figure 9.11 Collar insertion Figure 9.12 Protrusion of collar
(4) Using the jacket remover (use the hole at 0.5 side of label indication), remove the cover
(semi-transparent) of core wire of the optical fiber.
Housing
Clad
Core cover
max. 2 mm
Figure 9.13 Residual length of core cover