A SERVICE OF

logo

MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 62
(6) Take off the upper folding roller while pulling
the jam access lever.
Fig. 4-174
(7) Remove 1 E-rings and take off the gear and
pin.
Fig. 4-175
(8) Remove 2 E-rings and take off the 2 bearing.
(9) Remove 1 crip of the rear jam release lever.
Fig. 4-176
Upper folding roller
Jam release lever
Pin
Gear
Clip
Bearing
Bearing