44
Installation/Set up
Viewing
and Operation
Recording
Setting up
Others
Configure each setting items.
■ FTP General Settings
You can control the settings to connect to an FTP server.
●FTP sever:
Select either one of them below and enter correct information.
•
Server Name
•
IP Address
●User ID:
Only for a user who has the right to access FTP server. Ask FTP server
administrator for details.
●Password:
•
Enter password registered with user ID above.
●Port Number:
Usually, enter “21”.
Important
•
Do not change the port number unless your provider or the network
administrator instructs you to do so.
●MODE:
•
PORT (active mode): Select PORT if you are unsure about which mode to
choose.
•
PASV (passive mode): If the network camera is behind a firewall, access to the
FTP server may be restricted in PORT (active mode). In
this case, select PASV (passive mode).
●Connection to FTP Server:
•
Select “Stay connect” when transferring data frequently, like “Periodic FTP by
Schedule”. In this way, you can record images faster.
Recording Images on FTP Server (Cont.)
