Toshiba HV6CS-MU Manual

A SERVICE OF

next previous

- 16 -

3.2 Main Circuit Terminal Connections

Perform the steps shown in Figures 16 through 20 in that order.

Figure 16 Pass the cable or conductor

through the insulating cylinder.

Figure 17 Fasten the cable or conductor

to the main circuit terminal. The use of

30 mm or 35 mm hexagonal bolts for

M10 threads and 35 mm hexagonal bolts

for M12 threads is recommended.

Figure 18 Use both hands to connect the

cable or conductor to the terminal.

Figure 19 Do NOT connect the cable or

conductor to the terminal using only

one hand, as this may damage the

insulating frame.