⎯ 187 ⎯
6 F 2 S 0 8 5 7
/2 Status
1=Metering
2=Time Synchronization
3=Time zone
/3 Time synchronization
0=Off 1=IRIG 2=RSM 3=IEC 4=SNTP
Current No.= 2
/3 Time zone 1/ 1
GMT ( * * hrs ) GMTm ( * * min )
/3 Metering 1/ 1
Display value 1=Primary 2=Secondary 1
a-1
/2 Relay version 3/ 8
Relay type: ********************
Serial No.: ********************
Main software: ********************
/1 Setting(view)
1=Version 2=Description 3=Comm.
4=Record 5=Status 6=Protection
7=Binary input 8=Binary output 9=LED
a-1, b-1
/2 Description
Plant name: ********************
Description: ********************
/2 Communication
1=Address/Parameter
2=Switch
/2 Record
1=Fault record 2= Event record
2=Disturbance record
/3 Event record
1=Signal no.
2=Event name
/3 Fault record 1/1
Phase mode 1=Operating 2=Fault 1
/3 Disturbance record
1=Record time & starter
2=Scheme switch
3=Binary signal 4=Signal name
/4 Record time & starter 3/ 4
Time ( 3.0 s ) 1OCPS( 0.10 pu )
2OCPS( 0.10 pu ) 3OCPS( 0.10 pu )
1OCPG( 0.10 pu ) 2OCPG( 0.10 pu )
/4 Scheme switch 1/16
TRIP1 0=Off 1=On 0
TRIP2 0=Off 1=On 0
TRIP3 0=Off 1=On 0
/3 Address/Parameter 3/***
HDLC ( 1 ) IEC ( 1 )
SYADJ( 0 ms ) IP1-1( 0 )
IP1-2( 0 ) IP1-3( 0 )
/3 Switch 3/***
PRTCL1 1=HDLC 2=1EC103 2
232C 1=9.6 2=19.2 3=38.4 4=57.6 4
IECBR 1=9.6 2=19.2 2
/4 Signal no. 3/65
BITRN( 128 ) EV1 ( 3071 )
EV2 ( 0 ) EV3 ( 1 )
EV4 ( 1 ) EV5 ( 2 )
/4 Event name 3/128
Event name1 [Event record name1 ]
Event name2 [ ]
Event name3 [ ]
/4 Binary signal 3/16
SIG1 ( 128 ) SIG2 ( 3071 )
SIG3 ( 0 ) SIG4 ( 1 )
SIG5 ( 1 ) SIG6 ( 2 )
/4 Signal name 3/32
Signal name1 [Signal name1 ]
Signal name2 [ ]
Signal name3 [ ]
