E6581341
16
5. Specification
<Environment Specification>
Item Specification
Use Environment
Indoor, less than 3,000 m from the sea level.
No direct sunlight, corrosive or explosive gas, steam, cutting dusts or
dusts, grinding solution, and grinding oil.
Ambient Temperature 10 to 60
Storage Temperature 25 to 65
Relative Humidity 20 to 93 % (No condensation)
Vibration 5.9m/s² (0.6G) or less (from 10Hz to 55Hz)
< Control specification >
Function Specification
Relay contact output
Multi-function programmable output
1 circuits for output of 1C contact point
250Vac - 2A (cosφ=1)
250Vac - 1A (cosφ=0.4)
30Vdc - 1A
Contact point input
(Changeover of sink / source)
Multi-function programmable input
4 contact inputs
Sink input (24V common voltage)
ON : less than 10Vdc
OFF : 16Vdc or more
Source input
ON : 11Vdc or more
OFF : less than 5Vdc
24V power supply DC24V - 60mA
External thermal trip input 1 circuit. The detection level is below.
Tripping value : about 50 ohm or less,
or about 3k ohm or more
Reset value : about 1.8k ohm
-10V power supply DC-10V - 10mA
Open collector output
Multi-function programmable output
2 circuit
Current : 50mA max with external power supply
20mA max with internal power supply
Voltage : min. 12V, max 30V
Differential current input Accuracy : ±0.2% (25±10℃), Resolution : 11bit
Input resistance : 31.2k ohm (voltage input),
242 ohm (current input)
Current input : 20mA or less
Voltage input : differential voltage input less than 5V
-10V or more, and 10V or less
Analog input Accuracy : ±0.2% (25±10℃), Resolution : 11bit
Input resistance : 31.2k ohm (voltage input),
242Ω(current input)
Voltage input : 0 - 10V
Current input : 20mA or less
Monitor output 2 circuit
Voltage output :
0V - 10V±1%
Current output :
Pulse train input Input pulse
Voltage : 5V max
Current : 15mA max
Frequency : 30kHz max
Duty : 50±10%
