Advanced functions
16
EN
Customising your television
Preferences
You can set preferences for some features.These preferences remain in force as long as you
do not change them.
Display the OVERVIEW menu by pressing the MENU button. Select the Installation
option and confirm by pressing OK. Select the Preferences option from the
Installation menu and press OK to confirm.The Preferences menu offers the
following options:
Channel number: check this box using the OK button to permanently display the
number of the channel being watched.
Important:Due to the risk of screen burnout, we recommend that you disable this
function.
Language: select from the list the language the menus will be displayed in using the
buttons.
Note:When you select a language, it is applied to the menus immediately.
Maximum TV volume: set the maximum volume level using the buttons.To hear
the level that you have just set, press the
OK button and hold it for a few seconds.
Programme info pages: if you have changed the reference page for the TV
programmes in Teletext you can restore the factory-set reference pages. Press
OK until the
message
Running appears. Once the setting is implemented the message Done appears.
Power Savings Mode: when this function is active the TV set automatically goes into
standby mode after five minutes if it does not receive any signal on the selected channel or
AV programme.To enable this function, check the box by pressing
OK.
Teletext adjustment: use this function if one of the following situations occurs:
- Some channel names are missing following auto installation. Check/uncheck the box by
pressing
OK and run autoinstallation again.
- Teletext subtitles are not visible or are frozen. Check/uncheck the box by pressing
OK
and access the Teletext page displaying the subtitles.
- Some Teletext lines never display. Check/uncheck the box by pressing
OK and access the
Teletext page again.
The box is checked by default.
Burn in protection: when this function is on, it moves the picture on screen without
the user noticing it in order to prevent screen burnout.
Note:This function is enabled by default.
Press EXIT to close the menu. Select the option Return and press OK to return to the
Installation menu.
Preferences
Return
Channel number
Language
❿❿
English...
Maximum TV volume
Programme info pages ...
Power Savings Mode
Teletext adjustment
Burn in protection
Select your language using the ➛✓❿ keys.
