BASIC OPERATION
NOTE: When the player is brought out of Standby, it powers on at MAXIMUM
volume. This is so that you can control the volume via your TV handset
1) To play a DVD disc from the beginning
Press
on the handset or
II on
the player.
2) To change tracks when a DVD disc is playing
Press
to go forward one track at a time
Press
to go back one track at a time
.
(Some DVDs will return you to the Title screen).
Press PREVIOUS
to go back through the tracks.
3) Fast Forward Playback
Press
repeatedly
The speed cycles 2X
4X
8X
16X
32X
Normal
Press
or cycle to Normal Speed to resume normal play
4) Fast Reverse Playback
Press
repeatedly
The speed cycles 2X
4X
8X
16X
32X
Normal
Press
or cycle to Normal Speed to resume normal play
5) To Pause a disc during Play:
Press
II
on the handset or
II on
the player
Press
on the handset or
II on
the player to restart play
Page 8
6) Frame Advance
Repeatedly press STEP.
II to resume normal play.
7) Zoom:
Press ZOOM repeatedly
The picture size changes 2X
4X
OFF
When Zoom is greater than 1: use the
keys to shift the zoom point.
8) To alter the volume:
Use the VOL+/- keys on the handset to alter volume from 0 (min) up to 17 (max).
9) To mute/unmute the volume: Press MUTE on the handset.
10) Stopping the Disc
The STOP
button has two modes. When a disc is paused the laser is active. If
the disc is paused for too long the surface may burn. A special stop mode is avail-
able which stops the laser and the disc but memorises the position. When PLAY is
To temporarily stop the disc: Press STOP
on the handset. The icon
shown on the right will display temporarily.
Press
on the handset or
II on
the player to play from the point at which
STOP was pressed.
To permanently stop the disc: Press STOP
twice.
Press
on the handset or
II on
the player to restart play.
NOTE: If there is no activity i.e the disc is stopped or no disc is loaded, after a few
minutes the screen saver will appear.
After Use:
II
►
Zoomx2
