87
basics
get connected
1
Slide open the phone's bottom
connector and insert a mini-USB cable
into the phone's bottom connector.
2
Insert the other end of the mini-USB cable
into a vacant USB receptacle of your host
device. A virtual USB Comm Port will be
created on your host device upon
successful enumeration of the phone as a
USB Communications Device Class
device.
3
Ensure no application in your host device
is using the created COMM port. You
may need to ensure that the created
virtual COMM port settings are set as
follows:
• Bits per second
: 4800
•Data bits
: 8
• Parity
: None
• Stop bits
: 1
•Flow control
: None.
4
Start the GPS application on your host
device. Set the GPS application to start
accepting NMEA-0183 formatted data
from the created Virtual COMM port.
5
Set your phone to start sending NMEA-
0183 formatted location information.
Find it:
M
>
m
>
GPS > Interface > NMEA OUT >
USB.
Your phone is now actively sending location
NMEA-0183 formatted GPS data to your USB
host device.
To stop your phone from sending location
data:
Find it:
M
>
m
>
GPS > Interface > NMEA OUT >
Off.
Note:
Each time you power your phone Off,
NMEA OUT is automatically set to Off and
