Symbol Technologies PDT 8000 Series Manual

A SERVICE OF

next previous

22

PDT 8000 Series

information, see the communication instructions in the PDT 8000

Series Product Reference Guide.

Communicating with Printers

To print from a standard printer:

1. Attach the snap-on-printer cable to the serial port in the bot-

tom of the terminal.

2. Attach the other end of the cable to the Data Communica-

tions Connector on the printer.

3. Run the application's print function.

To print from an IrDA-compliant printer:

1. Point the IrDA port on the back of the terminal at the IrDA

port on the printer, at a maximum distance of 39 inches.

2. Run the application's print function.

Note: The terminal must have software configured to com-

municate with the printer you are using.