1-7
Getting Started
RS-232 Connection using Synapse
1. Connect the interface cable to the bottom of the scanner, as described in
Installing
the Cable
on page 1-2.
2. Plug the other end of the interface cable into the Synapse Smart Cable.
3. Connect the other end of the Synapse Smart Cable to the host.
Figure 1-6. RS-232 Connection using Synapse
4. If needed, plug one end of the power supply into the power receptacle on the RS-232
cable. Plug the other end into a wall outlet.
5. If needed, plug one end of the power supply into the power receptacle on the RS-232
cable. Plug the other end into a wall outlet.
Keyboard Wedge Connection using Synapse
To connect the Synapse cable with Keyboard Wedge:
1. Connect the interface cable to the bottom of the scanner, as described in
Installing
the Cable
on page 1-2.
2. Connect the other end of the interface cable into the Synapse cable.
