as s e m b L I n g t h e
S
t e a m mo p
8 Top Innovations
MICROFIBER CLOTHS
1. Lay one Microber Cloth on at surface, with two velcro strips facing upward.
2. Align Mop Head above Microber Cloth. Make sure Mop is oriented with Cloth as shown, and
centered as best as possible (FIGURE 2-A).
3. Press Mop Head rmly down onto Microber Cloth. Velcro strips will adhere to Pad Grips on
underside of Mop. Cloth should now be attached and ready for use (FIGURE 2-B).
4. To remove, use your foot to press down on Microber Cloth release tab while simultaneously
pulling Mop Head up off of Cloth.
CAUTION: Use care when handling a recently used Microber Cloth, as it may still be hot.
NOTE: Dirty Cloths may be washed and re-used. They are machine washable, and should be
allowed to air dry before use. Additional Microber Cloths may also be purchased through
the Top Innovations Web site (www.steamfast.com), or by contacting Customer Service
directly (refer to Page 14 for details).
FIGURE 2
A B
