23
MAINTENANCE
The safety and integrity designed into the Avari GX8 can only be maintained when the Avari GX8 is
regularly examined for damage and wear. Special attention should be given to the following:
Use the "
/ " buttons on the COMPUTER(20) to select a program and verify that the Generator System
provides different tensions. The Generator System should provide many years of use.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Verify that the Warning Labels are present and legible. Replace the Warning Labels if they are missing or
damaged.
Verify that all nuts, bolts, and knobs are present and properly tightened. Replace missing nuts, bolts, and
knobs. Tighten loose nuts, bolts, and knobs.
Worn or damaged components shall be replaced immediately or the
Avari GX8 removed from service
until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the
Avari GX8.
Keep your
Avari GX8 clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.
To store the
Avari GX8 simply keep it in a clean dry place.
The
Avari GX8 is approximately 89 3/8" long x 25 5/8" wide x 64 7/8" tall. These dimensions may vary.
Please measure your
Avari GX8 if exact dimensions are needed.
Move the
Avari GX8 with the moving wheels on the REAR STABILIZER(2). Lift from the Front Stabilizer
of the MAIN FRAME(1) to move the
Avari GX8. Two people are required.
To avoid damage to the COMPUTER(20), remove the batteries before storing the
Avari GX8 for one
year or more.
1.
2.
3.
4.
STORAGE
