13
En
TAPE PLAYBACK
Playback
Use type I (normal) or type II (high/CrO
2
)tapes.
1
Press zTAPE OPEN/CLOSE to open the tape tray.
2
Insert the tape.
Insert with the exposed the side facing forward, and press
zTAPE OPEN/CLOSE to close the tape tray.
3
Press d to start play.
To select a reverse mode
Press MODE (REV MODE on the remote control) repeatedly.
•To play one side only, select p.
•To play from the side facing upward to the opposite side
once only, select [.
•To play both sides repeatedly, select ].
To stop playback
Press s.
To change the playback side
Press d in playback mode.
To rewind or fast forward
Press f or g.
To reset the tape counter
Press s in stop mode, and the tape counter on the display is
reset to "0000".
Opening and closing the tape tray will also reset the tape
counter.
Notes on cassettes
•Use of 120-minute or longer tapes is not recommended
since they are extremely thin and easily deformed or
damaged.
•Wind up any slack in the tape with a pencil or similar tool
before use. Slack tape may jam in the mechanism.
Music sensor
If there is a 4-second or longer blank between each track, a
search for the beginning of the current or next track during
playback can be done easily.
When the X indicator on the display is appearing, press
f to move to the next track, or g to move to the
begininng of the current track.
When the C indicator on the display is appearing, press
g to move to the next track, or f to move to the
beginning of the currect track.
The search function may not be able to detect tracks under
the following conditions:
•Blanks of less than 4 seconds between tracks
•Noisy tracks
•Long passage of low-end sound
•Low overall recording levels
wREC/
REC PAUSE
MODE
SYNCHRO REC
s
dTAPE/
REC MUTE
zTAPE OPEN/
CLOSE
0–10, +10
CD EDIT/CHECK
dTAPE
REV MODE
REC MODE
s
wREC/
REC PAUSE
fg
f,g
