17
Easy Start
Adjust the projector angle:
• Shift the lens horizontally and vertically.
1 Press H&V SHIFT on the remote control.
2 Press P, R, O or Q on the remote control.
• Adjust the projector angle by rotating the
adjustment feet.
4. Adjust the angle
BP. 29
1 Press FOCUS +/– on the remote control to adjust the focus.
2 Press ZOOM +/– on the remote control to adjust the zoom.
5. Adjust the focus and the zoom
BP. 30
1
Press KEYSTONE on the projector or on the remote control.
2
Press ENTER on the projector or on the remote control.
3
Press
P, R, O or Q
to move the position for the upper left of the image.
4
Press ENTER to set the position.
5
Repeat the same procedure with the positions for the upper right, lower right and lower
left of the image.
• When the position of the lower left is set, the correction is
made and the display disappears.
6. Correcting the image distortion due to the projection angle
BP. 31
On the projector
Press INPUT R/P to display the INPUT list. Use INPUT R/P to select the Input mode, and
use O/Q to select the audio input terminal.
INPUT list
INPUT Audio
2 MONITOR OUT
HDMI
H
1 COMPUTER1
On the
projector
On the remote
control
On the remote control
Press HDMI, COMPUTER 1/2, S-VIDEO, VIDEO
to select the Input mode.
7. Select the Input mode
BP. 34
Press STANDBY/ON on the projector or STANDBY on the remote control, and then press
the button again while the confi rmation message is displayed to put the projector into
Standby mode.
8. Turn the power off
BP. 27
On-screen display
On the
projector
On the remote
control
