1-3
BEFORE USING THE MACHINE
Contents
This section provides basic information about the machine. Please read this chapter before using the machine.
PART NAMES AND FUNCTIONS
EXTERIOR
(1) Document cover*
Place an original on the document glass and close the
document cover before copying starts.
(2) Automatic document feeder
*
This automatically feeds and scans multiple originals. Both
sides of 2-sided originals can be automatically scanned.
☞ PLACING THE ORIGINAL (page 1-38)
(3) Front cover
Open this cover to switch the main power switch to "On"
or "Off" or to replace a toner cartridge.
☞ TURNING THE POWER ON AND OFF (page 1-15)
☞ REPLACING THE TONER CARTRIDGES
(page 1-69)
(4) Paper pass unit*
This transfers output to the finisher (large stacker) or
saddle stitch finisher.
(5) Operation panel
This is used to select functions and enter the number of
copies.
☞ OPERATION PANEL (page 1-8)
(6) Exit tray unit (right tray)
*
When installed, output can be delivered to this tray.
(7) Output tray (centre tray)
Output is delivered to this tray.
(8) Finisher*
This can be used to staple output. A punch module can
also be installed to punch holes in output.
☞ FINISHER (page 1-44)
* Peripheral device.
BEFORE USING THE MACHINE
(2)
(3)
(4)
(7)
(8)
(6)
(5)
(1)
When a finisher / saddle stitch
finisher is not installed
When a finisher is installed
