Using the devices
19
To switch the bodypack transmitter off:
̈ If necessary, deactivate the lock mode (see page 21).
To switch the bodypack transmitter on and to deactivate the RF signal on switch-on (offline
operation):
To activate the RF signal:
̈ Briefly press the ON/OFF button ƹ.
The bodypack transmitter transmits an RF signal. The transmission icon ብ is
displayed.
The red ON LED ´ lights up and the standard display “Frequency/Name”
appears on the display panel.
You can switch the bodypack transmitter on and deactivate the RF signal on switch-
on. For more information, see below.
̈ Press the ON/OFF button ƹ until “OFF” appears on the display panel. The red
ON LED ´ goes off and the display panel turns off.
When in the operating menu, pressing the ON/OFF button ƹ will cancel your entry
(ESC function) and return you to the current standard display.
̈ Press the ON/OFF button ƹ until “RF Mute On?” appears on the display panel.
̈ Press the SET button º.
The transmission frequency is displayed but the bodypack transmitter does not
transmit an RF signal. The transmission icon ብ
is not displayed
. When
the pilot
tone function is activated on both bodypack transmitter and receiver
, “RF Mute”
appears on the receiver’s display panel.
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
̈ Briefly press the ON/OFF button ƹ.
“RF Mute Off” appears on the display panel.
̈ Press the SET button º.
The transmission icon ብ is displayed again.
ON/OFF
ON/OFF
ON/OFF
SET
MHz
543.200
ew300 G3
MUTE
P
AF
ብ
ON/OFF
SET
