67
Using the “Conference Manager” software
Eliminating connection problems
If no connection to the central unit can be establis
hed or if the configuration cannot
be found, an error message appears.
̈ Check if the central unit is correctly connected
*
(see page 50) and switched on
(see page 20).
̈ If necessary, disconnect an existing connecti
on to the central unit in order to
establish a new connection (see next section).
̈ Click “Retry”.
Disconnecting the connection to the central unit
̈ In the menu bar, click “Global Menu” > “Disconnect”.
A confirmation prompt appears.
̈ Click “OK”.
The connection to the central unit is disconnected. If necessary, the software
changes to “Setup”
operating
mode.
Creating a new configuration
̈ In the menu bar, click “Global Menu” > “New Conference Document”.
The “Open” window appears.
̈ Select the “New Conference Document” option button.
̈ Click “OK”.
A new configuration is created. The software changes t
o “Setup” operating
mode and the Room View window is displayed (see page 60).
* only if you are using the Windows version of the software
