35
Computer Input
Select the resolution at the Display area dialog box.
Display area
Adjusts the horizontal area displayed by this projector. Press the
Point Left/Right button to decrease/increase value and then press the
SELECT button.
Display area H
Adjusts the vertical area displayed by this projector. Press the Point
Left/Right button to decrease/increase value and then press the
SELECT button.
Display area V
When this function is on, SXGA image is fully displayed at 4 : 3 aspect
ratio. It is displayed at 5 : 4 aspect ratio with this function off.
Full screen
Reset
Store
To store adjustment data, select Store and press the Point Right
button. A dialog box will appear and choose one of 5 modes and
then press the SELECT button.
Resets all adjustment to their previous levels.
Mode free
Vacant Mode
shows values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and “Display
area V.”
closes this dialog box.
To store adjustment data
To clear adjustment data
To clear adjustment data previously set, select Mode free and press
the Point Right button. A dialog box will appear and choose one of 5
modes and then press the SELECT button.
This Mode has parameters being stored.
NOTE
● Auto PC Adjust, Display area, Display area (H/V), and Full screen cannot be
selected when “480i”, “575i”, “480p”, “575p”, “720p”, “1035i”, or
“1080i” is selected in the PC System Menu (p32).
Select Store to store adjust-
ment data.
