Sanyo PLC-WXU300K Manual

A SERVICE OF

next previous

68

The image is distorted or runs off. –CheckPC adjustmentmenuorScreenandadjustthem. 

  Seepages31-32,35-36.

PIN code dialog box appears –PINcodelockisbeingset.EnteraPINcode(the“1234”ornumbers

 at start-up.  youhaveset).Seepages19,56-57.

The Remote Control does –Checkthebatteries.



 not work. –Makesurenoobstructionisbetweentheprojectorandremote

  control.

  –Makesureyouarenottoofarfromtheprojectorwhenusingthe

   remotecontrol.Maximumoperatingrangeis16.4'(5m). 

 –Makesurethecodeoftheremotecontrolisconformedtothe 

  projector’scode.Seepage55.

  –UnlocktheKeylockfunctionfortheremotecontrolfunction.See

   page56.

 Indicator blinks or lights. –Checkthestatusoftheprojectorwithreferringto"Indicators and

projector Condition".Seepage72.   

 The exclamation mark appears –Youroperationisinvalid.Operatecorrectly.   

on the screen.

Top control does not work. –Thetopcontrolisnotavailableifthetopcontrolislockedat

Key lock

  



underSecurityofSETTINGsection.Seepage56.

 Unable to unlock the Logo PIN –Contactthedealerwhereyoupurchasedtheprojectorortheservice

 code lock, Security key lock  center.       

 or Security PIN code lock.

Appendix

Appendix