A
DVANCED
F
AX
3.5
3
1
Press
Menu
until “Fax Feature” appears on the top line of the display.
2
Press the scroll button (
W
or
X
) to display “Delay RX Poll” on the
bottom line and press
Enter
.
3
Enter the number of the remote machine to be polled using the
number keypad.
To enter the number, you can use a one-touch keypad or speed dial
number. For details, see page 2.15.
4
Press
Enter
to confirm the number on the display. The display asks
you to enter another fax number.
NOTE
: The “Another No.” prompt does not appear if you have added numbers
for another broadcasting or delayed fax job. You must wait until the job is
completed.
5
To enter more fax numbers, press
1
to select “Yes” and repeat steps 4
and 5. You can add up to 10 destinations.
Note that you cannot use group dial numbers for another fax number.
6
When you finish entering fax numbers, press
2
to select “No” at a
“Another No.” prompt.
7
Enter the time using the number keypad.
To select “AM” or “PM” for 12-hour format, press the or button
or any number button.
If you set a time earlier than the current time, your machine will poll at
that time on the following day.
8
When the remote machine is secured with a 4-digit poll code, enter the
correct code and press
Enter
.
If not, press
Enter
to accept “0000” which represents no code, or
enter
0000
.
9
Press
Enter
when the start time displays correctly.
At the specified time. the machine will dial the numbers and receive
documents from the remote machine in the order you entered.
