Samsung DCS Keyset User Guide
– 12 –
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key before dialling.
Answering An Outside Call
•
••
•
Lift the handset and you are automatically connected to the ring-
ing call. (See Ring Preference under Customising Your Keyset.)
OR
Press the
ANS/RLS
key to automatically answer on the speaker-
phone.
Note: If a call is flashing at your keyset but not ringing, you must press the flashing
key to answer.
Universal Answer Device
Outside lines can ring over the paging system or to a loud ringer. To
answer calls ringing in night service to this device, dial 67 or press
the
UA
key.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key before dialling.
Recall Dial Tone
•
••
•
Press the
NEW
key to disconnect your existing call, wait for dial
tone and then make a new call on the same line.
Note: If the
NEW
key does not appear on your keyset, the
RECALL
key may be pro-
grammed to recall dial tone.
Sending a Flash
While on an outside call, press the programmed
FLASH
key to send a
flash to the telephone company. This is required for some custom
calling features or
CENTREX
use (e.g. for nuisance calls).
