Troubleshooting
178
5
-
--
-To prevent original misfeeds:
Placing the following kinds of origi-
nals on the exposure glass.
• Originals heavier than 128g/m
2
, 34
lb
• Originals lighter than 52g/m
2
, 14
lb
• Originals smaller than 148mm ×
210mm, 5.9" × 8.3"
• Originals larger than 297mm ×
864mm, 11.6" × 34.0"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased origi-
nals
• Originals with any kind of coating,
such as thermal fax paper, art pa-
per, aluminum foil, carbon paper,
or conductive paper
• Bound originals such as books
• Damaged originals
• Originals with glue on them
• Pasted originals
• Originals written in pencil
• Thin originals that have low stiff-
ness
• Originals with index tabs
• Transparent originals such as OHP
transparencies or translucent pa-
per
Note
❒ Do not mix different sizes of origi-
nals in the optional document
feeder.
❒ Remove staples or clips of origi-
nals. Fan originals that have had
staples or clip removed.
❒ Do not stack originals above the
limit mark.
