Troubleshooting
76
4
When the Receive File Indicator is Lit
If the Receive File indicator is lit, a message has been received but could not be
printed for some reason. The message was stored in memory (Substitute Recep-
tion). When you solve the problem, the message will be automatically printed
out. The table below lists some problems that could have caused Substitute Re-
ception to take place and their solutions.
Why Substitute Reception
Occurred
Indication/Status Solution
Paper has run out
B
is lit red. Load paper.
See p.69 “Loading Paper in the Main
Paper Tray”.
Toner is empty
D
is lit red. Replace the toner cassette.
See Cp.115 “Replacing the Toner
Cassette”,
Advanced Features
.
Note
❒
Even if there is no toner left, you
can still send fax messages.
Paper is jammed
h
is lit red. Remove the jammed paper.
p.73 “Clearing a Copy, Fax, or Print
Jam”
Cover is open
h
is lit red. Close the cover.
StellaF15_EN_Combine_F1_Pre_FM.book Page 76 Friday, August 27, 2004 6:22 PM
