12 Raymarine SR100 Sirius Weather System - Installation Guide
Antenna cable
CAUTION: Antenna cable
DO NOT cut or splice the antenna cable or remove the connec-
tors as system performance will be severely reduced.
The antenna cable should be used to connect the SRA-40 to the receiver. If
a cable length greater than the 25 ft. (7.5m) supplied is required a substi-
tute cable of suitable length should be purchased from your Shakespeare
dealer.
System activation
With your Sirius weather system correctly installed, this section details how
to activate Sirius weather.
Activation
To activate Sirius Weather:
With the weather system and your E-Series display powered ON:
1. Open a weather application page and make it active. For full details of
how to do this, refer to Raymarine Handbook No.
81244_2 E-Series
Networked Display - Reference Manual
.
2. Press the MENU key. The Setup dialog box appears.
3. Use the trackpad to highlight
Weather Setup Menu
.
4. Use the trackpad to enter
Weather Setup Menu
.
SeaTalk
hs
Cable SeaTalk
hs
Cable
SeaTalk
hs
Network Switch
E55058
SR100
E Series Display
SRA-40
Antenna
D9083_1
Setup
Weather Setup Menu...
System Setup...
Alarm Setup...
D9078_1
Weather Setup Menu
Sirius Weather ID XXXXXXXXX
Wind Symbol Arrow
Marine Watchbox Alerts ON
D9079_1
87067_1.book Page 12 Wednesday, February 22, 2006 7:44 AM
