Operation
15
Display USB Scanner status message
—
check this
box to confirm whether or not the scanner is activated.
Show scan progress dialog when TWAIN is
disabled
— check this box to display a scan progress
window when the TWAIN box is disabled.
Temp Folder
— lets you select the folder where image
files are stored. Set this folder on a drive with sufficient
disk space for large image files. Click
&OHDQ#WHPS#
&OHDQ#WHPS#&OHDQ#WHPS#
&OHDQ#WHPS#
IROGHU#ILOHV#
IROGHU#ILOHV#IROGHU#ILOHV#
IROGHU#ILOHV#
to delete the files in the temp folder.
Show all applications for each scanner button
—
uncheck this box to display only the applications that
were assigned to the button when you installed the
software.
Holding scanner button activates Preferences
window
— with this box selected, hold down any of the
buttons on the scanner to open the onscreen scanner
control panel
USB Scanner Utility Preferences
box.
(70%6+10"5'66+0)5
Click
Function
on the
Flatbed Scanner Utility Preferences
box, and then select the desired function button under
Select Menu
.
5'.'%6"/'07
Select Menu
lets you choose which button on the scanner
control panel you want to configure and set preferences for.
Choose a button from the drop-down menu. After selecting
a button, you can add or remove an application to be
associated with it, set advanced properties, or reset the
button to the default values.
#&&"#22.+%#6+10
Use
Add Application
to associate an application to the
selected button for post processing scanned images or
documents.
1. Select a button from the
Select Menu
drop down list.
The button's default application list appears.
2. Click
Add Application
. The
Open Application
dialog box
appears.
3. Browse for the location of the desired application. Click
OK
to add the application to the default application list.
