Polar RS100 Manual

A SERVICE OF

next previous

51

ENG

Note: Thecombinedimpactofmoistureandintense

abrasionmaycauseablackcolortocomeoffthe

transmitter’ssurface,possiblystaininglight-colored

clothes.Ifyouuseperfumeorinsectrepellentonyourskin,

youmustensurethatitdoesnotcomeintocontactwiththe

training computer or the transmitter.

Training equipment with electronic components may

cause interfering stray signals.Totackletheseproblems,

trythefollowing:

1.Removethetransmitterfromyourchestandusethe

trainingequipmentasyouwouldnormally.

2.Movethewristunitarounduntilyoundanareain

whichitdisplaysnostrayreadingordoesnotashthe

heartsymbol.Interferenceisoftenworstrightinfront

ofthedisplaypaneloftheequipment,whiletheleftor

rightsideofthedisplayisrelativelyfreeofdisturbance.

3.Putthetransmitterbackonyourchestandkeepthe

wristunitinthisinterference-freeareaasmuchas

possible.

IftheRS100stilldoesnotwork,thepieceofequip-

mentmaybeelectricallytoonoisyforwirelessheartrate

measurement.

Crosstalk.Aheartratesymbolwithoutaframeindicates

non-codedheartratetransmission.Wheninnon-coded

mode,thetrainingcomputerpicksuptransmittersignals

within1m/3ft.Simultaneousnon-codedsignalsfrom

morethanonetransmittercancauseanincorrectreading.