A SERVICE OF

logo

Open as PDF
next previous
10
Plantronics Voyager 510S Setup Guide
Note: If the side of the phone is curved, the protective cover on the side can be left on
to improve fit.
1. Remove the protective strips from the three mounting tapes on the underside
of the Lifter.
2. gently place the Lifter on the desk phone in the optimum position as determined
above. Test the Lifter to verify positioning by pressing the Call Control Button on your
headset to activate the Lifter and listen for a dial tone.
3. Press firmly to adhere the Lifter to the desk phone.
D. Mount the Lifter in permanent position
Peel back
mounting tape
protective strips
(3 places)
If your handset falls o the phone base or does not re-
turn to its cradle when lowered, you will need to attach
the Extender Arm to the Lifter as described in the HL10
Additional Parts Kit.
Use the Extender Arm to Stabilize Handset
(if needed)