22
En
USING DJ SOFTWARE
For DJS:
Control can be performed while viewing the center display’s
BROWSE, EFFECT, and MIX screens. For details of actual
operation, consult the chapter on “Manipulator Style”
operation of the SEP-C1 DJS Control Guide (PDF file on
accessory CD-ROM).
USING MIDI FOR COMPUTER CONTROL
MIDI (Musical Instrument Digital Interface) is a standardized
protocol used to govern data transmission between electronic
musical instruments and computers.
The SEP-C1 uses the MIDI message format to output its operating
data and status to a computer connected by USB cable. By using
a DJ software program with USB MIDI support to assign the MIDI
messages output by the SEP-C1, the SEP-C1 can be used to
control the DJ software.
For more information regarding messages output by the SEP-C1,
consult the section “MIDI MESSAGE TABLE” (P. 23).
1 Connect to the computer.
The center display will show the [PRO DJ] logo.
2 Start the DJ software program.
When communication is established with the DJ program, the
SEP-C1 operates as a MIDI controller, and the status of
controller A/B and center display section’s buttons and
controls are output as MIDI messages.
Setting a MIDI channel
MIDI channel setting can be performed from the UTILITY screen.
1 Press the UTILITY button.
2 Press the [PC] function button.
The center display will show the MIDI channel setting menu.
• Controller A uses the same channel as the center display,
while controller B uses a different channel. (Factory defaults
are for Controller A and center display to be set to Channel
1, and Controller B set to Channel 2).
3 Either press the rotary selector dial, or press the select down
(
) button.
The icon will move to the right.
4 Turn the rotary selector dial to change the value.
Values between 1 and 16 can be set.
5 Press the rotary selector dial to confirm the value selected.
• Press the select up () button to cancel the selection and
return to the UTILITY screen.
MEMO
• While the UTILITY screen is being displayed on the center
display, the center display’s buttons and rotary selector dial
cannot be used to control DJ software.
MEMO
• While the UTILITY screen is being displayed on the center
display, the center display’s MIDI messages are not output.
SEP-C1_EN.book 22 ページ ２００８年３月２４日 月曜日 午前１０時５２分
