73
En
Use Other Equipment With Your Flat Panel Display
06
Power On Mode
This option automatically selects the input when the panel is turned On.
Note:
This setting applies to all input sources.
Mirror Mode
This option reverses the image displayed on the screen.
Note:
This setting applies to all input sources.
Banner PIP
Use the Banner PIP option to adjust the translucence rate and display positions of the small window in P-in-P
mode.
• Translucent: adjusts the translucent rate of the small screen in P-in-P mode between Off and 80%. If the
percentage increases, the translucent rate also increases.
• Banner PIP: adjusts the display positions of the small screen in P-in-P mode
• Banner Input: determines the input signal for the small window in P-in-P mode
Parameter Description
INPUT 1 through INPUT 8
displays the selected input
Last* displays the last input selected
*Factory default
Parameter Description
On reverses the image
Off* does not reverse the image
*Factory default
Parameter Description
Translucent On adjusts the translucent rate
Off* No effect
Banner PIP Off* No effect
Bottom 1 through 3
adjusts display positions
Mid Low/High
Top 1 through 3
Banner Input INPUT 3* through 8 determines the input signal
*Factory default
PRO-141FD_PRO-101FD.book Page 73 Monday, May 12, 2008 3:27 PM
