Storing the strongest
broadcast frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under 0-9 (1–6) on the remote
contorl and once stored there you can tune in
to those frequencies with the touch of a but-
ton.
1 Use MULTI-CONTROL to select BSM in
the function menu.
BSM appears in the display.
2 Press MULTI-CONTROL to turn BSM on.
Searching is displayed. While Searching is
displayed, the six strongest broadcast frequen-
cies will be stored under 0-9 (1-6) on the re-
mote control in the order of their signal
strength. When finished, the preset channel
list appears.
# To cancel the storage process, press
MULTI-CONTROL.
3 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also changethe station by pushing
MULTI-CONTROL up or down.
Note
Storing broadcast frequencies withBSM may re-
place broadcast frequencies youhave saved
using 0-9 (1–6) on the remote control.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Press LIST to switch to the preset chan-
nel list mode during the frequency display.
2 Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station; press to select.
# You can also changethe station by pushing
MULTI-CONTROL up or down.
# If you do not operate the list within about 30
seconds, the preset channellist mode iscan-
celed automatically.
Notes
! You can also recallradio station frequencies
assigned to preset tuning numbers by push-
ing MULTI-CONTROL up or down duringthe
frequency display.
! You can also recallradio station frequencies
assigned to preset tuning numbers by press-
ing one of the preset tuning buttons 0-9(1-6)
on the remotecontrol.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use MULTI-CONTROL to select Local in
the function menu.
Local appears in the display.
2 Press MULTI-CONTROL to turn local
seek tuning on.
Local seek sensitivity (e.g., Level 2) appears in
the display.
# To turn local seek tuning off, press
MULTI-CONTROL again.
3 Push MULTI-CONTROL left or right to
set the sensitivity.
There are four levels of sensitivity for FM and
two levels for MW/LW:
FM: Level 1—Level 2—Level 3—Level 4
MW/LW: Level 1—Level 2
The Level 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Tuner
En
20
Section
04
