Basic Operations
Power ON/OFF
Turning the unit on
% Press SRC/OFF to turn the unit on.
Turning the unit off
% Press SRC/OFF and hold until the unit
turns off.
Selecting a source
You can select a source you want to listen to.
% Press SRC/OFF repeatedly to switch be-
tween the following sources.
XM (XM tuner)—SIRIUS (SIRIUS tuner)—
HD Radio (HD Radio tuner)—Tuner (tuner)—
DVD (DVD player/multi-DVD player)—CD
(built-in CD player)—Multi CD (multi-CD
player)—iPod (iPod connected with the inter-
face adapter)—USB1 (USB storage device 1)/
iPod1 (iPod 1 connected using USB input)—
USB2 (USB storage device 2)/iPod2 (iPod 2
connected using USB input)—EXT (external
unit 1)—EXT (external unit 2)—AUX1 (AUX1)
—AUX2 (AUX2)—BT Audio (BTaudio)—TEL
(BT telephone)
Notes
! In the followingcases, thesound source will
not change.
— When no unit corresponding tothe se-
lected source is connected.
— When there is no disc or magazine in the
player.
— When the iPod is not connected to this
unit with the interface adapter.
— When AUX (auxiliary input) is set to off
(refer to page29).
— When the BTAudio sourceis set to off
(refer to Activatingthe BTAudio source on
page 31).
! USB1/iPod1 and USB2/iPod2 arethe same
operations. However, sources are different de-
pending on the terminalwhich has been con-
nected to.
! USB storage device or iPod connected to the
USB port 1 on the front panel is USB1/iPod1
source.
Regarding the position of USB port 1, refer to
Head unit onpage 9.
! USB storage device or iPod connected to the
USB port 2 on the rear panel is USB2/iPod2
source.
Regarding the position of USB port 2, refer to
installation manual.
! If the HD Radio tuner is connected to this
unit, tuner sourceis skipped.
! When an USBstorage deviceor iPod is not
connected to the USB port of this unit,
NO DEVICE is displayed.
! AUX1 is set to on by default. Turn off the AUX1
when not in use (refer to Switching the auxili-
ary settingon page 29).
! Charging the portable audioplayer using
car’s DCpower sourcewhile connectingit to
AUX input may generatenoise. Inthis case,
stop charging.
! External unit refers to a Pioneer product (such
as ones availablein the future) that, although
incompatible as a source, enables control of
basic functions with this unit. Two external
units can becontrolled withthis unit.When
two external units are connected, the external
unit is automatically allocated to externalunit
1 or externalunit 2 by this unit.
! When this unit’s blue/whitelead is connected
to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antennaextends when
this unit’s source is turned on. To retractthe
antenna, turn the source off.
Adjusting the volume
% Turn MULTI-CONTROL to adjust the
sound level.
Operating this unit
En
11
English
Section
02
