Philips HX9500 Manual

next previous

UsingtheEasy-startfeaturebeyondtheinitialramp-upperiodisnot

recommended and reduces Sonicare’s effectiveness in removing plaque.

TheEasy-startfeatureshouldbedeactivatedwhenSonicareisusedin

clinical trials.

Smartimer

2-minute timer

All Sonicare models come with the Smartimer feature, which

automaticallysetsthebrushingtimetothe2minutesrecommended

bydentalprofessionals.

After2minutes,yourSonicarewillautomaticallyturnoffthe

toothbrush.

Ifyouwishtopauseorstopbrushingduringyour2-minutecycle,

press the power button. Press the power button again and the

Smartimerwillpickupwhereyouleftoff.

Note: The Smartimer will automatically reset to the beginning of a 2-minute

cycle if:

brushing is paused for 30 seconds or longer;

the handle is returned to the charger.

Quadpacer

30-second interval timer

Quadpacermakessurethatyoubrushallsectionsofyourmouth

evenlyandthoroughly.Whenusingatwo-minutebrushingcycle,you

will hear a short beep and a pause in brushing action at 30, 60 and

90 second intervals.

Programmable Quadpacer timer (select models only)

The Programmable Quadpacer timer offers you the option of customizing

the Quadpacer performance in 1 of 3 ways:

Youmayopttokeepthefactorydefaultsettingofa2-minute

brushing time with Quadpacer feature activated.

Youmaychoosetoextendyourbrushingtimeto21/2minutesby

adding an additional timing interval of 30 seconds with Quadpacer

feature active.

Youmaychoosea2-minutebrushingtime,butwiththeQuadpacer

feature turned off.

To change the Quadpacer settings:

1 Place the handle in the charger that is plugged into a live electrical

outlet.

2 PresstheDualSpeedControlbuttonbrieyandnotewhichLED

lights up.

3 Press and hold the Dual Speed Control button. Continue to hold

thebuttonwhiletheLEDsslowlycyclethroughthetiminginterval

setting options.