Recording (continued)
Timer recording (VIDEO
Plus+
®
System)
This is a simple programming system for
DVD recorders. To use it, enter the
VIDEO P
lus+
®
programming number
associated with your television
programme. You can find this number in
your TV listings magazine.
All the information needed by the DVD
recorder for programming is contained in
the programming number.
A Turn on the TV power. Select the
correct Video In channel at the TV.
B Press TIMER on the remote control.
The timer schedule list appears.
1
2
3
4
5
6
Source RecMode Date Start
End
Timer Schedule
VPS
C Press OK to confirm.
Or, press key to go to the next
available empty slot and press OK.
The VIDEO Plus+
®
System menu
appears.
VIDEO Plus+ System
OK
CancelConfirm
5
Enter the VIDEO Plus+ programming
number for the show you wish to
record. Press [RETURN] to return
to timer schedule or [TIMER] to
exit timer.
D Use the numeric keypad 0-9 to enter
the VIDEO Plus+
®
programming number
for the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in ‘53124’).
To clear the VIDEO Plus+
®
programming
number, press CLEAR on the remote
control.
To cancel the VIDEO Plus+
®
programming, use keys to select
in the menu and press OK.
E To confirm your entry, select
in
the menu and press OK.
The system will store the timer entry
and return to the timer editor menu.
If the channel number of the TV channel
has not been assigned to the
programming number, you will have to
manually key in the channel number that
is assigned to the VIDEO Plus+
®
code.
Follow the instructions on the TV.
F Press TIMER to exit the menu.
G Insert a DVD+R/+RW into the DVD
recorder.
H Press STANDBY-ON to turn off the
DVD recorder.
If the DVD recorder is not in standby
mode, a warning message will appear
three minutes before the recording
starts.
If you ignore the warning message,
the DVD recorder will automatically
switch to standby mode to prepare for
timer recording at the designated time.
The ‘TIMER’ icon will light up on the
display panel if a timer recording is set.
TIPS: Ensure that there is sufficient space available on the DVD+R/+RW before recording.
You have to finalise the DVD+R before it can be played on other players, see page 36.
16861_dvdr3305_05_eng5.indd 32 2005-06-29 4:09:55 PM
