P/N: 4809631
©2007 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
23MAY07 v1.0 Template(4809631v1.0)
8-1
8.0 RADIATOR HOSE
Section 8
RADIATOR HOSE ASSEMBLY
Fig. 8.0-a
A. From the stock radiator hose, make two 90°
elbows by trimming as shown. The first is
with 3" long legs for the thermostat housing
end. The second, with 2" long legs, is from
the middle of the stock hose and attaches to
the radiator.
B. Place the stainless water pipe between the two
hoses placing the shorter leg nearer the radia-
tor.
C. Position the hoses and tube so there is ample
overlap for sealing, then secure with provided
clamps.
D. Refill radiator and coolant bottle.
*** NOTE ***
Make sure the cooling system is completely full. Air
is often trapped in 5.0 systems.
