Watching TV
24
[16:9] [4:3 Full]
Directly displays the image at 16:9
without distortion (anamorphic).
Displays a 4:3 image enlarged
horizontally to fit the screen.
●
For Digital TV or HD signal
[14:9] [Zoom1]
Displays the image at the standard
14:9 without distortion.
Displays a 16:9 letterbox or 4:3 image
without distortion.
[Just] [Zoom2]
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
[4:3] [Zoom3]
Displays the image at the standard 4:3
without distortion.
Displays a 2.35:1 letterbox
(anamorphic) image full-screen without
distortion.
At 16:9, displays the image at its
maximum (with slight enlargement).
Note
●
Only [16:9] and [4:3 Full] are available in Digital TV.
●
Aspect is fixed to [16:9] in Digital TV. /
●
Only [16:9] and [4:3] are available in PC input mode.
●
Aspect cannot be changed in 3D mode.
●
Aspect cannot be changed in teletext service. /
●
Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals except in
Digital TV.
Last view
Switch to previously viewed channel or input mode easily
●
Press again to return to the current view.
Note
●
Switching channel is not available while the recording of Timer Programming is in progress.
●
Switching channel is not available while One Touch Recording is in progress.
●
Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
Standard Time / Summer Time
■ Region Select - Adjust the standard time
Select the region where you live to adjust the standard time.
●
The time contained in the broadcast signal is UTC (Universal Time coordinated) formally known as GMT
(Greenwich Mean Time).
■ Daylight Saving Time - Adjust for Summer Time
Select time offset from the standard time for Summer Time.
●
Normally select [Auto].
●
If there is a gap between displayed time and actual time, set this function.
Region Standard time Daylight Saving Time : Auto (During Summer Time)
NSW / ACT
+10:00 +11:00
Victoria
Queensland +10:00
South Australia +9:30 +10:30
Western Australia +8:00
Northern Territory +9:30
Tasmania +10:00 +11:00
●
These items can be set from [Other Settings] in the Setup Menu. (p. 48) (Based on GMT)
