E
N
G
L
I
S
H
8
CQ-DFX572U
23
E
N
G
L
I
S
H
7
CQ-DFX572U
22
CD Player
Note:
≥Loading a disc when the power is off allows the
power to be turned on.
≥It may take some time to distinguish CD-DA and
MP3 before playback starts.
≥The title information can be displayed. (➡ page 23)
Track Selection
[TRACK 5]/[5]: Advance to the next track.
[TRACK 6]/[6]: Back to beginning of the cur-
rent track.
Back to previous track.
(Press twice.)
Open the front panel.
Press [OPEN] on the front panel.
1
Insert the disc.
The display changes as shown below.
Playback will start automatically after the unit
recognized the loaded disc as an ordinary
music CD. (When a CD-R or CD-RW which has
CD-DA formatted data as the same as an ordi-
nary music CD is loaded, this unit recognizes it
as an ordinary music CD.)
Close the front panel manually.
2
CD Player Mode
(When CD is in the player)
Press [SRC] (SOURCE)/[SOURCE] to change to CD
player mode.
Playback will start automatically.
Listening to a CD
Disc Insert and Playback
Stop and Disc Eject
1 Press [OPEN] on the front panel.
2 Press [<] (eject) to stop CD play and eject the
disc.
CD player mode display
≥Do not insert a disc when “DISC” indicator lights.
≥Lights when the disc is loaded/played.
Repeat and random indicator
Track Search
Press and hold.
[TRACK 5]/[5]: Fast forward
[TRACK 6]/[6]: Fast backward
Release to resume the regular play.
Note:
≥Ejecting the disc when the unit is in the CD player
mode allows the power to be turned off.
Caution:
≥Only 5z (12 cm) CD, CD-DA data recorded CD-R and CD-RW discs, MP3 data recorded CD media (CD-
ROM, CD-R, CD-RW) are available for this unit.
≥If a disc contains both CD-DA and MP3 data, only one type of data will be played back. For example, if
the disc starts with CD-DA data, it will be recognized as an ordinary music CD, if it starts with an MP3 file,
it will be recognized as an MP3.
≥Refer to page 51 about notes on CD-Rs/RWs.
≥Refer to page 42 about notes on MP3.
≥To avoid damaging the front panel, do not push it down or place objects on it while it is open.
≥Do not use irregular shaped discs.
≥Do not use discs that have a seal or label attached.
≥Do not insert foreign matter into the disc slot.
≥Do not watch the scroll display while driving a car. (➡ page 24)
Track number
Direct Track Selection
Example: track number 10
1 Press [„] (NUMBER).
2 Press [1] [0].
3 Press [BAND] (SET) to set.
The corresponding track starts playing.
Note:
≥Press [DISP] (display) or [„] (NUMBER) to re-
turn to the regular mode.
Only for the remote control unit
Pause
Press [BAND] (
[ [
/1).
Press [BAND] (
[ [
/1) again to cancel.
Display Change
Press [DISP] (display) to change the display.
Track number/track playing
time (Default)
Disc title (scroll)
(➡ page 24)
Track title (scroll)
(➡ page 24)
Clock display
Note:
≥The display shows title information only when a
disc which has CD text information is loaded. (Up
to 62 letters can be displayed when scrolling.
Some letters are not serviceable.)
≥ : Displays when there is no
title information.
(Data reading.)
(Ordinary music CD recognized and play-
back starts.)
Track playing time
