Operating Instructions
49
2.6.2 Using Operation Bar
You can operate camera on the monitoring page. If the feature is not permitted, the
buttons are grayed out.
Preset
Display:
When clicking a preset button, the preset name
appears. Camera operation information is also
displayed.
Refresh: The latest registered buttons are displayed (see
page 52).
Pan/Tilt
Scan
*1
:
*1
If the camera disables their controls, you cannot control their features.
Moves the lens throughout the horizontal ( ) or
vertical ( ) range, and returns to the original
position.
Pan/Tilt/Home
Position*
1
Controls lens direction.
Pan ( : Left, : Right), Tilt ( : Up,
: Down) and Home Position ( : Center)
Preset
Button*
1
:
Applies the camera direction to a preset position.
Zoom*
1
Zooms in or out (see page 50).
Tele , Wide
Focus*
1
Focuses the image (see page 51).
Near , Auto , Far
Brightness*
1
: Changes brightness in nine steps including [STD]
(Standard). Clicking [-] or [+] changes the image
brightness.
Resolution*
1
: Selects [640 x 480], [320 x 240] (default) or [160 x
120] pixels.
Image
Quality*
1
:
Selects the image quality.
• [Favor Clarity] optimizes the image for good
clarity.
• [Standard] keeps the standard quality. (default)
• [Favor Motion] optimizes the image for motion
display.
