Advanced Settings
26
2.Speaker Setup
Allows you to change the speaker configuration such as existence of subwoofer, crossover
frequency, and so on. Settings are automatically configured if you use the Automatic
Speaker Setup.
Furthermore, you will not be able to select this setting if you have a pair of headphones
connected or you are listening through your TV speakers.
Speaker Settings
Change the impedance of the connected speakers, the type of front speaker connection,
and other speaker settings.
Setting item Default Value Setting Details
Speaker
Impedance
6ohms Set the impedance of the connected speakers.
"4ohms": When any of the connected speakers
have4Ωormoretolessthan6Ωimpedance
"6ohms": When the connected speakers all have 6
Ωormoreimpedance
Front Speakers
Type
Normal Select the type of front speaker connection.
"Normal": When front speakers are connected in a
normal manner
"Bi-Amp": When front speakers are bi-amp
connected
Powered Zone 2 No Set presence of speaker terminal connection of
Zone 2
"Yes": When speakers are connected to ZONE2
speaker terminals
"No": When speakers are not connected to
ZONE2 speaker terminals
• If "Front Speakers Type" is set to "Bi-Amp", this
setting will be set to "No".
• For impedance, check the indications on the back of the speakers or their instruction manual.
Speaker Configuration
Allows you to change the speaker configuration such as presence or not of each speaker,
crossover frequency, and so on. Settings are automatically configured if you use the
Automatic Speaker Setup. Audio will not be output while you are making this setting.
Setting item Default Value Setting Details
Subwoofer Yes Set whether a subwoofer is connected or not.
"Yes": When subwoofer is connected
"No": When subwoofer is not connected
Front 80Hz (THX) Select the frequency to start outputting bass
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is
connected
• "Front" will be fixed to "Full Band" if
"Subwoofer" is set to "No", and the bass
frequencies of the other channels will be output
from the front speakers. To make the settings,
refer to the instruction manual of the speakers
used.
Center 80Hz (THX) Select the frequency to start outputting bass
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is
connected
• This setting cannot be set to "Full Band" unless
"Front" is set to "Full Band".
Surround 80Hz (THX) Select the frequency to start outputting bass
frequencies (crossover frequency) for each
channel from "40Hz" to "200Hz".
"Full Band": Full band will be output.
"None": When no compatible speaker is
connected
• This setting cannot be set to "Full Band" unless
"Front" is set to "Full Band".
