CHRONOGRAPH MODE
COUNTDOWN TIMER
HOURS/MINUTES REMAINING
SET COUNT DOWN TIME
TIMER NUMBER
SECONDS REMAINING
COUNT DOWN TIMER
MINUTES/SECONDS
SET COUNT DOWN TIME
SPLIT/LAP TIME
HUNDREDTHS OF SECONDS
CHRONOGRAPH
COUNTDOWN TIMER
In alarm mode press MODE to change to count down timer.
There are three, count em three, countdown timers. Minutes,
Hours, and Days.
PRESS LAP/RESET to select T1, T2, or T3.
PRESS START/STOP for 2 seconds and “hour” and “minute” will flash.
PRESS START/STOP again to start or pause the timer. In T2 (hour
count down) and T3 (day count down) repeat the setting
process above.
CHRONOGRAPH MODE
This watch is not for running, but the 286 can tell you how long it
takes to ride, walk, or drive somewhere.
PRESS MODE and go to the chrono mode. “ST” will be in the
upper left hand side of the display.
PRESS LAP/RESET reset the chronograph.
PRESS START/STOP to start and stop chrono.
To view the Split or Lap time, press LAP/RESET while the chrono is
running.
To reset the chrono, press START/STOP and then press LAP/RESET
In Split function, Split time is the difference between two
LAP/RESET (button presses)
In Lap function, Lap time is the difference from the start of the
chrono and the (last) LAP/RESET button press.
nix.023.02/286/inst_mech 9/24/03 5:12 PM Page 9
