English
5. ATTACHING AN ARM STAND
The LCD monitor can be used with an optional arm stand.
Using our optional arm or stand is recommended. (Ask your local dealer for
information.)
NOTE
• If you will use the arm or stand of other manufacturers, confirm the followings to the
manufacturers before selecting.
- Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)
- Supportable Weight: Total weight of the monitor (without stand) and attaching
equipment such as a cable
- TÜV/GS approved arm or stand
• Please connect cables after attaching an arm stand.
Setup Procedure
1. Lay the LCD monitor down. Do not scratch the panel.
2. Fold the stand. (Insert the stand firmly.)
3. Attach an arm stand to the LCD monitor securely.
4 Mounting Screws (enclosed): M4 x 12 mm
Arm-stand
22 5. ATTACHING AN ARM STAND
