English
28 8. SPECIFICATIONS
8. SPECIFICATIONS
LCD Panel 50 cm (19.6 inch), TFT Monochrome LCD panel
Anti-Glare Hard Coating 3H, Response Time: approx. 40 ms
Viewing Angle
Horizontal: 170°, Vertical: 170° (CR≥10)
Dot Pitch 0.249 mm
Horizontal Scan Frequency 75 kHz (only exclusive timing supported)
Vertical Scan Frequency 60 Hz (only exclusive timing supported)
Resolution 2M pixels (1600 dots × 1200 lines)
Dot Clock 162 MHz
Gray Scale 1024 steps of 3061 steps
Display Area 398.4 mm (H) × 298.8 mm (V) (15.7” (H) × 11.8” (V))
(Viewable image size: 498 mm (19.6”))
Power Supply
100-120/200-240 VAC 10%, 50/60 Hz, 0.9-0.7/0.5-0.4 A
Power Consumption Min.: 65 W, Max.: 85 W (With USB hub)
Power Saving Mode: Less than 6 W (When the USB hub are not
connected.)
Input Connector DVI-D × 1
Input Signal TMDS (Single Link)
Dimensions
337 mm (W) × 493 ∼ 575 mm (H) × 208.5 mm (D)
(13.3” (W) × 19.4” ∼ 22.6” (H) × 8.2” (D))
Dimensions (without stand) 337 mm (W) × 441 mm (H) × 78.5 mm (D)
(13.3” (W) × 17.4” (H) × 3.09” (D))
Weight 8.3 kg (18.3 lbs.)
Weight (without stand) 5.3 kg (11.7 lbs.)
Environment Conditions
Temperature
Operating: 0 °C ∼ 35 °C (32 °F ∼ 95 °F)
Storage: -20 °C ∼ 60 °C (-4 °F ∼ 140 °F)
Humidity 30 % to 80 % R.H. Non-condensing
Pressure 860 to 1,060 hPa
USB Standard Rev. 2.0 complied self-powered hub
Communication Speed 480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Downstream Power Supply 500 mA for each (Max.)
USB ports Upstream port × 1, Downstream port × 2
Certifications and Standards TÜV Rheinland /GM, CB, NRTL/C-TÜV, CE (93/42/EEC), FCC-A
Classification of Equipment Type of protection against electric shock: Class I
EMC class: EN60601-1-2 2001: Group1 Class A
Classification of medical device (MDD 93/42/EEC): Class I
