26 4. ADJUSTMENT
4-3. Color Adjustment
The “ColorManagement”menu in the ScreenManager enables to change the color of the
screen.
Before the Color adjustment
• Allow the LCD monitor to stabilize for at least 20 minutes before making color
adjustments.
• After finishing each adjustment in the custom mode, select “Save” icon to resister the
adjustment. Otherwise, the adjustment will be lost.
• The values shown in percentages represent the current level within the specific
adjustment only. They are available only as a reference tool. (To create a uniform
white or black screen, the percentages for each will probably not be the same.)
• Perform the “Range Adjustment” before making the color adjustments. The gradation
pattern like below is recommended at the “Range Adjustment”.
1. To change the color tone of the white.
Set the “Temperature”
p.42)
The temperature can be set from 4,000 K to 10,000 K , in 500 K increments (except
9,300 K). The default setting is “OFF”.
To resister the adjustment in the custom mode, select the “Save” icon and then push
the enter button.
• The values shown in the Kelvin are available only as a reference tool.
• Setting the temperature under 4,000 K or over 10,000 K invalidates the color
temperature setting. (The color temperature’s setting turns “OFF”.)
• Adjusting the “Gain” (p. 27) invalidates the color temperature setting. (The
color temperature’s setting turns “OFF”.)
