Safety lock
Electronic programme locking (the
Locked
indicator lamp is on)
prevents the door from being opened
or the programme cancelled during a
programme.
–
The
Anti-crease/Finish
lamp flashes
to show that an attempt has been
made to alter a programme. This has
no effect on the programme
sequence.
–
The locking function is switched off
at the end of the programme, during
"Rinse hold" and after the appliance
has been switched off.
Engaging the safety lock
^ Select a programme.
^ Press the START button until the
Locked
indicator lamp comes on.
– The safety lock has been activated.
–
The machine will not accept any
changes to the programme and the
programme will proceed to the end.
To de-activate the safety lock
^
Press the START button until the
Locked
indicator lamp goes out.
Or, if the
Anti-crease / Finish
indicator is
flashing:
^
Select the programme originally
selected, and press the START
button until the
Locked
indicator
lamp goes out.
Safety lock
39
