Electronic system lock
The system lock prevents your
machine being used without your
knowledge.
If the system lock has been activated it
is not possible to start a programme.
To activate the system lock
Before you begin, first ensure that
:
–
The drum door is closed.
–
The programme selector is at
Finish
.
A Switch the machine on using the
I-On/0-Off
button.
B Press the
Short
,
Pre-wash
or
Soak
button and keep it pressed in while
carrying out steps C to E .
C Slowly turn the programme selector
clockwise
stage by stage to
Cottons
60°C
.
D Now slowly turn the programme
selector anti-clockwise
stage by
stage to
Finish
.
E Next slowly turn the programme
selector anti-clockwise
stage by
stage to
Shirts 40°C
.
The
Locked
check light (lower right
on the control panel) will flash.
F Now release the
Short
,
Pre-wash
or
Soak
button.
G Turn the programme selector to the
Finish
position.
H Switch the washing machine off
using the
I-On/0-Off
button.
To deactivate the system lock
Repeat steps A to F. The
Locked
check light will go out.
Changing the programme sequence
27
