The Settings menu can be used to
alter the machine's electronics to suit
changing requirements.
Settings can be altered at any time.
To open the Settings menu
^
Switch on the machine.
^
Turn the programme selector to
Further programmes/Settings 4.
The following will appear in the
display:
Further programmes
Settings !
;
Maintenance programme ,
^ Confirm the selection of the
highlighted Settings
! option by
pressing the OK button.
To select a setting
^ Press the X or Y button to scroll
through the options until the setting
you want is highlighted and confirm
your selection by pressing the OK
button.
To close the Settings menu
^
Select Back
# or wait for approx. 15
seconds and the display will return to
the programme menu automatically.
Language !
The display can be set to appear in
one of several different languages.
You can change the language via the
Language sub-menu.
The flag after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
A tick L will appear beside the
language to show that it has been set.
Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are two volumes:
Off
(The machine is delivered with this
option selected.)
The buzzer is switched off.
Normal
The buzzer sounds at normal volume at
the end of a programme or when Rinse
hold is reached.
Loud
^
The buzzer sounds at maximum
volume (Loud) at the end of a
programme or when Rinse hold is
reached.
Settings menu
68
