Turning ON
The cooktop must be turned on before
any of the burners can be used.
Do not leave the appliance
unattended during operation!
To turn the cooktop On:
^
Touch the s On/Off touch control .
The power-ON indicator will turn on and
- will appear in all the burner displays.
If no further entry is made, the cooktop
will turn itself off after a few seconds for
safety.
To turn a burner on and select a
power level
^
Touch the On/Off touch control for
the desired burner.
0 appears in the burner display.
^ Touch the desired power level
number on the settings bar.
For a setting between two power
levels (see "Power settings"), press
the area between the numbers.
The power level setting will flash for a
few seconds and then remain steady.
To change the power level
^ Touch the On/Off touch control for
the desired burner.
The power level will flash in the burner
display.
^
Touch the respective number on the
settings bar to set the desired power
level.
If only one burner is on, the power
level can be changed without
activation.
Use
14
