A SERVICE OF

logo

Open as PDF
next previous
- Roof liner
(depending on model)
^
Remove the runners.
^ Unscrew the wing nut.
Lower the top heating element. Do
not use force to pull it down as this
can cause the element to break.
^ Take out the roof liner.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
- Side panels
(depending on model)
^
Remove the runners.
^
Lift the side liners up slightly before
removing them.
Reassemble in the reverse order,
carefully ensuring all parts are correctly
in place.
^ Ease the back lug into the opening in
the rear wall panel.
^
Lift the front locating hole on to the
guide pin behind the collar.
^
Put the runners back into place.
Cleaning and care
51