28
ENGLISH
❖ Sub Control
Contrast Red
: Sets how much red contrast comes out in images.
Contrast Green
: Sets how much green contrast comes out in images.
Contrast Blue
: Sets how much blue contrast comes out in images.
Brightness Red
: Sets how bright red comes out in images.
Brightness Green
: Sets how bright green comes out in images.
Brightness Blue
: Sets how bright blue comes out in images.
Clamp Position
: Sets the clamp position.
Clamp Width
: Sets the clamp width.
❖ Miscellaneous
DCDi
: Turns the DCDi feature on/off.
FRC (Frame Rate Conversion)
Auto : Basically disables frame rate conversion, but it is enabled by the vertical frequency of the input signal.
On : Enables frame rate conversion. All input signals are converted to 60 Hz.
CCS (Cross Color Suppression Function)
On : Enables cross color suppression.
Off : Disables cross color suppression. Use this mode for sources that do contain cross colors, such as progressive
scanning DVD players.
Sharpness Filter
: Sets the sharpness of DVI and RGB images.
